Double beds do it yourselfpossibly. It is two times cheaper and not at all for a long time (a couple of days). And how exactly, from what, let's see ... It will take a router to cut holes and screws for fastening parts, bolts when you need to fasten parts from the outer, visible side. As well as vinyl glue for greater reliability of fasteners (parts are lubricated at the junction points).
- Without drawing, no "amateur" to beginnot at all worth it. In it, you will reflect both dimensions, and proportions, and additional details (for example, shelves). The drawing will be a guarantee of perfect (or almost perfect) handmade work.
- Like any other design, bedsDouble do-it-yourself are built on the basis of the frame. We will make it from 4-thick (3 cm) wooden beams, preferably from pine. We connect them together with screws and get a rectangle whose length is equal to the length of the future bed, and width, respectively.
Be sure to strengthen it over the entire length.Otherwise, your wooden bed, assembled with your own hands, will not be happy for long with its reliability. For a strong body is not enough four beams. Parallel to the base of the bed (back and headboard) we will strengthen three more, evenly distributing them along the length of the rectangular frame.
- We nail the legs. For them, take wooden bars (it is better from oak, only it will withstand such a load) of the desired height and rather thick.
- All the resulting construction must be sanded and varnished.
- The top dense layer of plywood with a thickness of 1 cm is screwed onto the frame from above with the help of screws.
- The bed is upholstered with a cloth, under the fabric in acuteplaces put a thin layer of foam rubber, it is possible and around the perimeter. The fabric is fastened to the wooden frame at the bottom of the bed by any reliable means at hand, the buttons will also fit, but as additional fastenings.
- There is a headboard of the desired shape and color, andalso the back (in the legs), if such is planned. Backs can be picked up in a hardware store such that the bed fits perfectly into the interior of your bedroom. And you can order the masters. You instantly sawn backs from plywood of any shape, what you say. Screw the headboard with bolts, and since they will be visible from the outside - pick up “prettier” (there are special decorated bolts for sale).
- The mattress for the bed is either purchased in the store, after measuring the bed, or it is made independently of the necessary length and width from foam rubber, sheathed with a strong cloth.
So, now we know how to make double beds with their own hands. It remains the case for the smallest - to realize the most courageous your drawing, without departing from the specified algorithm of actions.
By following these sequential steps, you canto plan, as mentioned at the beginning of the article, the construction of additional details. Double beds with their own hands are decided to make it for the sake of translating such original ideas. For example, boxes inside the frame are constructed of the desired length and width, which would include all bedding. Can not be said about the drawers of beds and sofa beds sold in furniture stores. Only bed linen can be removed out of sight. But what about pillows, mattress and blankets ... Or drawers on wheels, sliding from the sides of the bed ... What else can you think of?
The bed transformer do it yourself as wellmaybe, but harder. You can create a design that changes from bed to table or wardrobe. On sale there are also many-tier transforming beds for a child's room (the number of beds changes). The easiest way to make a bed-table. It is a structure made of a frame, sheet of plywood and legs. Remove the bed with a mattress - and this is a table. More original will look such a transformer rounded. You cannot buy a mattress for such a bed, but you can make it yourself from foam rubber.
