Sooner or later, in any office or office, the question arises: how to fill the seal with ink. It would seem that a fairly simple exercise requires from the person performing it certain knowledge and skills.
Types of seals
In order to know how to fill in the ink with the ink correctly, first it’s worth finding out what kinds of them are.
We all remember from childhood stamp printing.They are easy to use, but not very convenient. Together with the stamp, you should always wear a stamp pad, which is in a separate box. This is a good option if printing is used at the same workplace, but if mobility is needed, you should pay attention to other types.
Automatic printing is more practical.in application. It is both compact in storage and more convenient for affixing clear and even impressions. But there are some difficulties with it, because you need to clearly know how to refill automatic printing.
The hardest things with flash stamps.In their design is not foreseen a pillow with paint, which is tucked directly into the matrix itself. In addition, this type of stamp is most often of several colors, which further complicates the task.
What ink to take?
Before you correct the printink, you need to select them. The best option if you take the paint of the same manufacturer that was used earlier. But it is not always possible to find out her brand. Therefore, it is necessary to carefully approach the issue.
The ink is divided into water, oil and alcohol.For official documents in offices, the most commonly used ones are water based. They are well absorbed by the paper and not smeared. But from moisture can flow, which indicates the nature of their foundations.
Спиртовые чернила используют для непористых surfaces such as glass and metal. A characteristic feature of these paints: they dry out pretty quickly, do not smear and are difficult to erase from surfaces.
Oil ink is less common.They are used in manufacturing for marking parts and boxes. Well behaved both on a porous surface and on a smooth one. On paper, leave a massive fat trail.
When the ink is determined, it is worth not to forgetabout their color. Mixing different colors on the same pillow is strictly prohibited. Now it is possible to consider in more detail how to fill the press with ink.
The simplest options
Oddly enough, but today it is still quite often used the simplest form of stamps that require a separate ink pad. The easiest way to handle them.
Open the box with a porous substance and gently drip a small amount of paint on it. The main thing is not to overdo it, otherwise then the prints will look like blots, and their text will not be legible.
We are waiting for the paint to be distributed evenlysurface. If desired, this process can be accelerated by stretching the ink over the surface with a clip. After the porous substance is completely soaked, we make several proof prints. If the seal makes them clear, then everything is fine. But there may be other options.
If the prints are not clear, you need to add some more ink and repeat the procedure again, because you already know how to fill in the stamp printing.
When the prints are blurry, the ink is too much. They are removed with any porous paper, such as napkin or toilet paper.
How to refill automatic printing?
Stamps in mechanical accessories are characterized by the fact that they have no visible stamp pad. To get it, you need to show some skill.
Press down slightly on the lower part of the mechanism andusing the buttons, lock it in a position that allows access to the pillow. Gently push your finger into the side, pull it out of the snap-in and place it on a flat, clean surface.
Далее при помощи шприца или специальной бутылочки With a thin nose, apply ink about 2 mm thick. Using a paperclip or similar tool, spread the paint over the surface and let it soak. Remove ink with a tissue or handkerchief.
After an hour or two, put a pillow in place andmake a few prints. If you did everything right, they will be clear and bright. The main thing at the time of refueling to ensure that the pillow itself did not fall on dust, dirt or villi.
Highest skill level
The hardest thing to figure out how to fillflash print. The thing is that she has the most unusual design. To begin with we will disassemble it, having removed a fixing ring with a knife. Next, put the matrix on a clean substrate on a completely flat surface. Using a syringe, gently drip paint on its surface and try to distribute it evenly.
To seal completely soaked, you need to leaveher for a few hours, and then check by making a few prints on a blank piece of paper. But before that, it is still worth removing excess moisture on its surface. This is done by a good porous paper.
If you are satisfied with the quality of prints, you can assemble a flash print by repeating the reverse disassembly of the action. If the prints are not clear enough, it is worth refueling the porous substance of the stamp.
Multicolor printing
Already it became clear to all how to fill the seal“True copy”, “Sold”, “Paid”. After all, they use only one color ink. But there are some stamps that have multi-colored pillows. They refuel in the same way as monochrome, but with some features.
В первую очередь нельзя допустить смешивания paints. The easiest way is to refill each ink individually. At first it is applied on the central part and is evenly distributed. There is a need to very carefully ensure that it does not overdo it, otherwise it will go beyond the limits of its zone.
After one color is absorbed, we carry out the procedure with the next. And so on until all zones are filled. This procedure will take a decent amount of time.
Flash print of two or more colors refilled withhand prints. First, the central part is poured, and then its edges. Here you also need to be extremely attentive, so that the colors remain in their zones.
Common Errors
And now we will consider options how it is impossible to fill the seal with ink. After all, its quality and service life depend on it.
In order not to be bothered with the disassembly of equipment, manyoffice workers drip paint directly onto the matrix. This is not correct for the reason that an insufficient amount of ink enters the stamp pad. It is also not evenly distributed.
It is also not recommended to drip paint into a pillow not taken out. It does not control its quantity. Soak up the good ink also can not.
Do not dip the pillow directly into the paint. In this way, you will overpay and ruin it. It is also not advisable to do this with a flash print. The effect will be the same.
For stamps to serve for a long time, they need care and proper charging of pillows.
Some subtleties
It does not always pass the option that describes howfill the rectangular seal, as well as round. First of all, the official stamp of the enterprise is never refilled. It changes the pillow every time. This is due to the fact that the color and composition of the print should always be the same.
It is not recommended to fill the pillow more than three times. During the long exploitation time there are dents on it, which significantly reduce the quality of impressions.
Also, many manufacturers do not recommendadd ink to the stamp pads automatic snap. According to them, the pillows themselves are not designed for this and still will not give as clear impressions as new ones. But this nuance is more of a commercial nature, because the pillow is more expensive than a bottle of stamp paint.
When working with any seals, you must be extremely careful and avoid the slightest chance of contamination, because dust, sand and hair will significantly affect the clarity of subsequent prints.
Trust the professionals
Finally I wanted to remind you that everyone already knowshow to fill the print with ink, but not everyone can do it. This is especially true for complex multi-color stamps. Therefore, in order not to risk big money, it makes sense to contact a special service that will do everything for you. In this case, you spend a symbolic amount, much smaller than the one that will have to pay for a new snap-in or print. This is exactly the case when the risk does not justify itself.
