Do you repair yourself or hire workers, butin any case, you will wonder about the sequence: stretch ceiling or wallpaper. First, we will analyze how the ceiling is mounted and what consequences may occur in this case. Also consider the production of materials, which accessories may be needed for installation.
Stretched ceiling
Before deciding what to start inrepaired room: first stretch ceiling or wallpaper on the walls, let's examine what is the stretch ceiling? In simple words, this is a stretch of PVC or fabric material. Fasten them with a profile of metal or plastic to the wall. The design at the discretion of the customer can be complicated by creating different variations in the levels of gypsum board. Mounting the structure can be made to the ceiling, this will depend on the type of profile.
Wallpaper
Wallpaper is a paper cloth, twisted inroll. The material can be single or double layer, also distinguish vinyl wallpaper, from acrylic or non-woven. It's no secret that the composition of the material affects the cost of the roll as a whole. If the base of the sheet is paper, then it is coated with glue, if non-woven, then glue is applied to the wall.
Preparation
Before you start working, you need to remember aboutnext (regardless of the selected sequence - stretch ceiling or wallpaper first): the first stage of repair should be the preparation of walls and rooms in general. Release them from the old coating, be it paint, lime, remove if there are, greasy or dirty stains.
Do not expect the ceiling design to beclose all the shortcomings and you can leave it as it is. It is unlikely that anyone will like that the old finish on the tensioning cloth crumbles or falls off pieces. Therefore, it is necessary to prepare walls completely before installing anything.
If there is a need for puttying walls or ceilings, you can proceed, then allow time to dry.
While you have not decided, stretch ceiling or wallpaper,First prepare the ceiling surface, do not ignore the defeat of fungus or mold. These places must be cleaned and smeared with a special remedy against lesions. Immediately prepare the electrical wiring and the future place for lamps or chandeliers. All wires should be removed into the cable - channel or corrugated pipe. Basis for flooring - screed or flooring - must also be met.
Stretched ceiling or wallpaper? First we ask a professional
Let's analyze different opinions.What are the recommendations of the builders when answering the question about what is done first: stretch ceiling or wallpaper? You will not hear a definite answer. Because taking into account all the wishes for the ceiling, the decoration of the walls is of great importance. Therefore, it is necessary to plan the repair and carefully consider the design in advance. Of course, sticking wallpaper to the ceiling is easier. After all, it is not necessary to dock level, and all the shortcomings will close the design of the tension web.
However, when mounting the profile for the clothdust will be scattered. It is attached to the walls with a screwdriver and dowels at a short distance from each other. Therefore, freshly pasted wallpaper in this way can be spoiled.
Ceiling Mounting
After the walls are prepared, that is, theyaligned and applied primer, you can proceed with the installation of the profile to which the ceiling will be fixed. Specialists can cope with this task for a couple of hours. Then the next stage of installation begins, which consists of the following sequence:
- The ceiling material is inserted into the profile.
- Stretch and straighten the canvas.
- Then heated with hot air, produced by a heat gun.
- From heating, the web is stretched and fixed in the required position.
At the end of the work surface is allowed to cool -about 3 hours. Airing of the room is allowed. Lastly, a so-called decorative cap between the material and the walls is mounted. It will block the gap formed. Now the question is not relevant: a suspended ceiling or wallpaper, at first it will be logical to glue the wallpaper, and then finish it with a strip at the junction.
Types of installation
There is also a harpoon method - this is whenthe profile has already been attached to the canvas, the manufacturer needs accurate data in order to carry out the construction as accurately as possible. After production of the ceiling, it is impossible to modify and adjust the size.
In case of a non-charcoal version, it can be adjusted.just cut off the size and the extra part, but it should be done very carefully so that the blade does not damage the canvas. With this method of installation is easier to handle even a novice.
If you plan to plaster the walls of plasterboard, then first set the mortgage, in order to strengthen the profile.
If the ceiling is small, then use the ceiling profile for structural stability, otherwise it will not work.
Consider the standard ceiling option withoutexcesses, in this case, the canvas is stretched entirely and attached to the profile. Then, if you first install the ceiling, and then begin to glue the wallpaper, you can stain the canvas with glue, as the wallpaper needs to be pulled as tight and high as possible. And this means that it is better to start working from the walls, and then move on to the top, that is, first the wallpaper, then the stretch ceiling.
Multi-tiered ceiling
And if the ceiling is unusual, for example, inseveral tiers, or do you want intricate figures from drywall, then what first to glue: wallpaper or suspended ceiling? In this embodiment, the ceiling must be putty, thus it is possible to harm the walls, pasted over with wallpaper. The conclusion suggests itself: you need to start the repair from the ceiling, and then go to the walls, you can stretch the canvas at the very end of the repair.
Wallpaper after the ceiling
Do not be afraid of the work of the heat gun, nothing will be stuck to the wallpaper.
First glue wallpaper or make a suspended ceiling?If the ceilings are already stretched, and I want to update the walls and re-paste the wallpaper, then this should be done very carefully. Wipe glue off the ceiling immediately before it dries. If, nevertheless, the top is not properly glued, then it will be possible to close the eaves, although this is not the best option, it is better not to use it, but you should take note if you are repairing yourself. Best of all can come from polyurethane foam, and they are mounted much easier. Also, this method will be very useful if the ceiling is already mounted and you need to remove the old wallpaper.
Professionals say: start from the ceiling, and explain it with the following reasons:
- Walls after installation of the ceiling structure can crack due to severity, and if the finishing is already finished, all work is for nothing.
- As already mentioned, after drilling holes in the wall, a sufficient amount of dust forms, what to speak of brick walls? She will surely ruin the look of the wallpaper.
- When installing the canvas or profile is very difficult not to touch the wall. Traces of hands or additional equipment that will be difficult to remove can seriously damage the wall decoration around the perimeter.
- It is not excluded that the heat from the heatguns can affect the wallpaper. Not to mention the glue used in the finish. Therefore, you need to give a week for the walls to dry. So you can not be afraid that they will go bubbles or wallpaper will come unstuck.