Filtration systems in one form or anotherThey are used in any infrastructure related to water supply. Unless agricultural needs can do without a thorough cleaning of the resource for watering operations. And if drainage elements are required in the domestic economy to get rid of the liquid from the smallest chemical impurities, the filter unit for the pool aims to bring the hydrological object into an acceptable state in terms of elementary sanitation and hygienic standards.
The device of the filtration system for the pool
Delivery kits include kits with items,allowing to assemble a multifunctional filtering unit. It is important to note that even in simple versions such equipment is a complex complex designed for multistage cleaning. The basis of any model is the engine that drives the central pump. Also, basin cleaning filters in the basic configuration include a set for connection with pipe communications. For this, pipes, valves, o-rings and fitting connections with adapters are used.
Separately to monitor worker parametersThe process uses measuring devices, which can go in the basic configuration, but already in premium expensive models. These are pressure gauges for measuring pressure, sensors and timers. Also, without fail, the filter unit for the pool is equipped with an absorbent device. In most cases, reservoirs for sand filler are used, but there may be other cleaning agents.
Basic Characteristics of Installations
One of the main parameters, which is worthTo pay attention when choosing the appropriate model, is the performance. Units of the initial level provide pumping with an intensity of 1200-1500 l / h. But a large pool for family use will qualitatively serve only the installation, the capacity that provides at least 5000 liters per hour.
It is also worth considering the power - on average itis about 0.5-1 liters. from. From this indicator depends not only the above-mentioned productivity, but also the ability of the filtration system to work for a long time in an automatic mode. On average, such units are able to function without interruptions from 2 to 12 hours. If a filter unit for a small pool is selected, then the dimensions of the equipment should be taken into account. For example, a container with sand filler can have a diameter of 30-40 cm, depending on the design and power. As for the mass, it is 2-3 kg for models from the middle price segment.
Select by placement method
There are two versions of filter unitsThis type - ground and hinged. In the first case, the pump is mounted in close proximity to the pool. Such units are supplied with an installation that performs pumping of water, as well as a control panel. With the help of the pumping station, the water is delivered to the filter through the hose, bypassing which it returns. This is a classic system designed to work at medium and high performance. In turn, hanging filter units for the pool are designed for maintenance of inflatable or frame containers, the volume of which is 8-10 m3. Such units are fixed to the edge of the frames with brackets. Typically, manufacturers of prefabricated pools provide special sites for mounting filter stations.
Selection by cleaning type
The most affordable option - swimming pools,working on cartridges. In special devices there is a sorbent capable of purifying water from particles with a fraction of 5-10 mcg. The filter cartridge is updated after 2 weeks. Systems with sand filling are more reliable and durable. It is recommended to use them if it is planned to clean a large pool of leaves, grass or the same sand. But there is one drawback for such aggregates - the size of the fraction of the delayed particles is more than 20 mcd. The most effective is the diatom purification device. It is also refilled with cartridges, but as a filler, a special rock is used. The fraction of the element retained by such a filter is no more than 5 mcd.
Manufacturers
Users appreciate installation frommanufacturers BestWay and Intex. In particular, BestWay offers a functional unit in the modification of 58199 BW, the power potential of which is 300 W. Through a special tank and sand filler, the unit pumps water at a rate of about 6000 l / h. No less worthy are the filtration units for the Intex pools, which are also equipped with powerful motors that circulate at a high frequency. A feature of some models of this brand is the content of glass sand, the fraction of which on average is 0.5-0.7 mm.
Installing the filter unit
First of all, the skeleton base is mounted.The unit is twisted with special screws and fixed with brackets to the place in which the operation is planned. Next, you need to install the functional components. The hoses are connected to the pool connectors, and special garbage collectors are fixed to the base of the frame. If the pool filtering installation is to be used continuously, then protective equipment should be provided. Manufacturers recommend to install covering structures that protect the same engine from precipitation and mechanical damage. In this case, the surface on which the station is mounted should be as durable as possible and free from excessive vibrational vibrations.
Conclusion
Qualitatively collected and correctly calculatedUnder the characteristics of the pool, the filtration unit will provide clean water in the tank and will not cause technical problems during operation. In this case, much depends on the basic quality of the unit, which, in turn, is determined by the cost. For example, a filter installation for a pool, the price of which is 10-15 thousand rubles, is more likely to have a reliable and durable construction. However, you should not overlook the budget segment, in which high-quality installations can also be presented. Again, you should focus on the products of brands level Intex. High performance models of economy class are unlikely to please, but also surprises in the form of premature breakdowns also do not deliver.
